BIM, BIM Technical Sheet

Technical Data Sheet: Milas Pearl Marble

Posted by
SL01320Milas20Pearl20Luxury20Los20Angeles20Villa20Stairs

Technical Data Sheet: Milas Pearl Marble

Physical and Mechanical Properties

Property Value Unit
Hardness 3.0 Mohs
Unit Volume Weight 2.71 g/cm³
Density (Specific Gravity) 2.73 g/cm³
Water Absorption (Atm. Pressure) 0.10 % (by weight)
Water Absorption (Atm. Pressure) 0.20 % (by volume)
Water Absorption (Boiling Water) 0.20 % (by weight)
Water Absorption (Boiling Water) 0.30 % (by volume)
Porosity 0.20 %
Compressive Strength 650 kg/cm²
Compressive Strength (After Freezing) 620 kg/cm²
Strength to Blow (Impact Resistance) 12 kgf·cm/cm³
Strength to Bending (Flexural Strength) 115 kg/cm²
Ratio of Fullness (Solidness) 99.30 %
Degree of Pores 0.70 %
Average Abrasion Strength 24.50 cm³/50cm²

Technical Analysis & Usage Notes

  • Low Porosity: With a water absorption rate significantly below 0.5%, Milas Pearl is highly resistant to staining and moisture penetration, making it an excellent choice for wet areas such as bathrooms and spa interiors.
  • Durability: The high Ratio of Fullness (99.30%) indicates a very dense material with minimal internal voids, contributing to its structural integrity and polish retention.
  • Aesthetics: To maintain the “pearl” luster, it is recommended to apply a high-quality impregnating sealer after installation to protect the calcium carbonate structure from acidic substances.
Newer
Technical Data Sheet: Mugla Antelope Marble
Back to list
Older Technical Data Sheet: Milas Lilac Marble

Related Posts