BIM, BIM Technical Sheet

Technical Data Sheet: Mugla Gray Marble

Posted by
SL01520Mugla20Grey20Luxury20Los20Angeles20Villa20Enterance

Technical Data Sheet: Mugla Gray Marble

Property Value Unit
Hardness 3.0 Mohs
Unit Volume Weight 2.71 g/cm³
Density (Specific Gravity) 2.73 g/cm³
Water Absorption (Atmos. Pressure) 0.10 % (by weight)
Water Absorption (Atmos. Pressure) 0.40 % (by volume)
Water Absorption (Boiling Water) 0.20 % (by weight)
Water Absorption (Boiling Water) 0.50 % (by volume)
Porosity 0.40 %
Compressive Strength 65 – 80 MPa (N/mm²)
Compressive Strength (After Freezing) 60 – 75 MPa (N/mm²)
Strength to Blow (Impact Resistance) 12 – 15 kgf·cm / cm³
Strength to Bending (Flexural Strength) 10 – 14 MPa (N/mm²)
Ratio of Fullness (Solidness) 99.6 %
Degree of Pores 0.4 %
Average Abrasion Strength 18.5 – 22 cm³/50 cm²

Analysis & Usage Recommendations

  • Durability: With a high Ratio of Fullness (99.6%) and very low Porosity, this marble is highly resistant to environmental pollutants and staining, making it suitable for both interior and exterior cladding.
  • Performance: The Compressive Strength remains relatively stable even after freezing, which indicates good performance in colder climates (Freeze-Thaw resistance).
  • Applications:
    • High-traffic flooring (honed or polished).
    • Exterior wall facades.
    • Wet areas (bathrooms and pools) due to low water absorption.
    • Decorative elements and furniture.

Note: These values are based on average laboratory test results. Since natural stone is a product of nature, slight variations in color, texture, and technical values may occur between different quarry blocks. For specific architectural projects, it is always recommended to request a batch-specific test report.

Newer
Technical Data Sheet: Mugla White Marble
Back to list
Older Technical Data Sheet: Mugla Antelope Marble

Related Posts